-7%
-7%
|
#91636502
Round Weld-On Shock Eye Mount for Tie-Rod Shock
- Weld-on design for mounting all tie-rod end shocks
- 5/8" diameter tapered hole
- 7 degree like Ford tie rods
$6.49
/each
In Stock
$6.99
Save $0.50
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Steel, Black Oxide
- Weld-on design for mounting all tie-rod end shocks
- 5/8" diameter tapered hole
- 7 degree like Ford tie rods
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91636502 Details
Speedway Motors 91636502 Details
Speedway Motors 91636502 Specifications
Speedway Motors 91636502 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91636502 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Black Oxide |
| GENERAL | |
| Outside Diameter | 1.37" |
| Overall Thickness | 0.75" |
| Top of Taper | 0.52" |
| Bottom of Taper | .60" |
| Degree of Taper | 7 degree |
| Color | Black |
| Notes | This is intended only to be used w/ the monroe shock tie rod mounts or stud kit 535AK35. If Ford tie rod ends are considered, use 91636503 (triangular). |
| Sold in Quantity | Each |
Ratings & Reviews
4.6
11 Reviews
Customers highlight the product for its correct dimensions, practicality, and quality. It's ideal for several uses such as in ladder bar setup, custom 3/8" plate steering arms, and welding projects. It promises a stable mounting hole for fabricating various mounts like Panhard bars and shock mounts. While the product is too thick for certain uses and may require alterations, clients appreciate its versatile usage, affordability, and quality. It is recommended for strong anchoring points but may not fit all tie rod ends. The product's value is underlined by its usability in manufacturing savings.
Ratings & Reviews
4.6
11 Reviews
Customers highlight the product for its correct dimensions, practicality, and quality. It's ideal for several uses such as in ladder bar setup, custom 3/8" plate steering arms, and welding projects. It promises a stable mounting hole for fabricating various mounts like Panhard bars and shock mounts. While the product is too thick for certain uses and may require alterations, clients appreciate its versatile usage, affordability, and quality. It is recommended for strong anchoring points but may not fit all tie rod ends. The product's value is underlined by its usability in manufacturing savings.
4.6
11 reviews
5
9
4
1
3
0
2
1
1
0
Most Liked Positive Review
5.0
Great price, great quality
These will not fit ford steering tie rod ends as the diameters are just a bit too small but for a shock eye they would be great! Or if you have access to a lathe you can set the taper and turn them till you get them to the correct size for steering tie rods then weld them to your steering arms. Was able to turn these eyes and weld them on speedways flat plate steering arms thus saving 70$ plus dollars on a reamer....
Most Liked Negative Review
2.0
not so hot
wanted to use as a welding bung to allow use of tapered Ford tie rod ends to plain straight holes-- but unit is too thick to get nut on tie rod--must grind a lot (over 1/8") from small diameter side to allow tapered stud's nut to tighten far enough to allow use of cotter pin
Filter by Ratings
The parts were dimensionally correct.
5.0
4 years ago
Paul
Tennessee
Verified
I used these on a ladder bar setup.
Would Recommend
I've bought these several times
5.0
6 years ago
TimogensTurbo
Coos Bay, Ore.
Verified
I use these in custom 3/8" plate steering arms for use Tierod ends. I machine a step in the outer body.
Would Recommend
Weld on
5.0
7 years ago
Drehm
Youngtown,AZ
Verified
Used this for a project I'm working on.
Would Recommend
Good fit
5.0
7 years ago
Txweld
Texas
Verified
Don't get elongated
Very handy
5.0
8 years ago
Bchctybob
Central Ca
Verified
I have Speedways 7 degree taper reamer but I always keep these in stock just in case. They work great for shock mounts but also for fabricating Panhard bars mounts and hairpin radius rod mounts giving you a thick, stable mounting hole without having to use heavy, bulky plate for the mounts.
Would Recommend
Worked perfect for splitting wishbones and mounting tie rods
5.0
9 years ago
Metalmover
Tacoma Wa.
Verified
Perfect for weld in tie rod bungs.
Would Recommend
not so hot
2.0
10 years ago
edski
mansfield, Texas
Verified
wanted to use as a welding bung to allow use of tapered Ford tie rod ends to plain straight holes-- but unit is too thick to get nut on tie rod--must grind a lot (over 1/8") from small diameter side to allow tapered stud's nut to tighten far enough to allow use of cotter pin
Would Not Recommend
worked perfect
5.0
10 years ago
jim
Redding, CA
Verified
I used as weld on tier rod end, I couldn't get the castle nut on without turning them down but came out perfect
Would Recommend
Nice piece
5.0
10 years ago
chassisbldr
Central Ca.
Verified
Nice spuds to provide a strong anchor point for rod ends. Inexpensive. Lots of uses.
Would Recommend
Quality part
4.0
10 years ago
32truck
Midwest
Verified
Was as described and at a good price
Showing 10 of 11 reviews